Shoe Goo – The original – Clear 110ml Tube

The unique formula is designed for strong abrasion resistance and better adhesion to flexible materials. Bonds, protects and rebuilds for a permanent repair. Excellent sealant. Perfect for patching small holes. Waterproof bond remains secure even when exposed to water. Shoe Goo is great for making crash repairs to R/C bodies for extending their life. Directions: Surface should be clean, dry and free of dirt. – Puncture seal in neck of tube using pointer cap. Ideal application temperature range is 50 to 90 degrees Fahrenheit (10 to 32 degrees Celsius). However, fully cured adhesive can withstand temperatures from -40 to 180 degrees Fahrenheit (-40 to 82 degrees Celsius) intermittently. – Apply directly to surfaces to be protected, bonded or repaired. For waterproofing and protecting, use thin coats (spread with a disposable tool) to build a thick coating, allowing each layer to set 3-4 hours. – Allow Repair to cure for 24 hours. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours. – For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. – Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping Please Note: May damage finished surfaces. Avoid such contact until completely cured. Not recommended for use on polystyrene, polyethylene, polypropylene, Styrofoam, or paper products. Not recommended for any items that come into contact with food, drinking water, or animals.