MissMooRC After Run Oil (30mls)

MissMooRC is proud to release our After Run Oil for nitro radio control cars. This product is suitable for both on-road and off-road models. The main ingredients in any R/C nitro fuel we use in our models is hygroscopic which attracts moisture in your nitro engines causing rust when left sitting. MissMooRC recommend that at the end of a day of racing or running your nitro vehicle you run out any fuel in the engine by starting it up and disconnecting the fuel line from the carburettor and looping it back to the pressure line inlet on your fuel tank. Once you have run the engine out of fuel add a few drops of our MissMooRC After Run Oil down the glow plug hole and turn engine over a few times to spread oil around the engine. MissMooRC only recommend this as a temporary storage solution. We recommend that you remove you engine from the car, remove the clutch and clean the outside thoroughly with a brake cleaner (purchased from an auto store) ensuring you don’t get any in the carburettor. Follow this up by pulling down the engine and flushing it out with brake cleaner. Once everything has dried out, inspect components for any wear and replace if needed. Rebuild your engine using our MissMooRC After Run Oil and re-install it back into your vehicle ready for it’s next outing. Bottle size is 30mls